What are the details to pay attention to when installing bathroom facilities

What are the details to pay attention to when installing bathroom facilities?

1、 Installation details of exhaust fan

Attention should be paid to the installation of exhaust fans, as they can help keep the bathroom away from moisture problems. Therefore, when installing exhaust fans, it is important to install reverse flow gates to prevent humid and polluted air from flowing back.

2、 Ceiling installation details

When installing the ceiling keel, attention should be paid to flatness, and the spacing deviation of the keel should be controlled within the allowable range of 1.5 meters. The installation of the keel should be inserted in sequence, and the keel, suspension rod, and connecting piece should be in the correct position. If there are suspended load-bearing parts, horizontal secondary keels should be added, and the distance between the suspension rod and the end of the main keel should not exceed 300mm. Large lighting fixtures, exhaust fans, etc. should be separately fixed with keel. The bathroom brand Rikang Quanwei reminds that if they are directly placed on the aluminum buckle plate, it is easy for the aluminum buckle plate to fall off, causing certain hidden dangers.

3、 Installation details of doors and windows

When installing doors and windows in the bathroom, be sure to pay attention to the position of the door boundary. It is better to install them slightly higher than the inside of the bathroom.

4、 Installation details of washbasin

When choosing a washbasin, it is necessary to choose a "full body" one, and not one with only one layer of surface rubber shell, because a countertop with only surface rubber shell cannot be repaired once it is damaged. (To check if the countertop is "solid", a light can be used to illuminate it from the back at a close distance. Only countertops that are transparent are considered "solid".). In addition, the bathroom brand Rikang Quanwei reminds everyone to apply sealant at the seams of countertops and washbasins to prevent water from seeping out.

5、 Toilet installation details

The traditional method of fixing the toilet to the ground by filling it with cement mortar during installation and construction has a major drawback, which is that once the toilet needs to be reinstalled or the pipeline is severely blocked, it can only be knocked off. To avoid this situation, it is more suitable to use a dry construction method, which involves embedding nylon wall bolts and setting up toilet installation holes for installation. The bathroom brand RiKang reminds customers to pay attention to several points when adopting this construction method:

(1) When drilling the installation hole for the toilet, be sure to drill according to the position shown in the installation diagram to avoid dimensional errors.

(2) The nylon wall bolt should be fully embedded in the ground, and it is important to avoid cutting off the exposed part of the ground due to insufficient drilling depth.

3) It should be noted that if the construction site is uneven, the ground should be leveled first, and then during installation, the bottom of the toilet should be attached to the ground.